Collection process introduction:
There are three waste gas sources in the plant, i.e. the oil fume generated by three machines working, and the three forging equipment are sealed around, so as to form a closed space. According to the field measurement and drawings, the dimensions of the closed space of three machines are determined to be 6500 × 8000 × 3000mm, 8200 × 8700 × 3500mm, 5500 × 8000 × 3000mm, so as to calculate the air volume. According to the formula, q = l × w × h × air change times, three machine stations The air volume generated is 20000m3 / h, 30000m3 / h and 10000m3 / h respectively. Considering from many aspects, three equal ionization trappers and composite photo oxygen equipment are required for this waste gas treatment.
Waste gas treatment process introduction:
According to the physical and chemical properties of the waste gas of the project, and considering the waste gas treatment effect, process investment and operation cost, our company adopts the combined process of "ionization catcher + composite photo oxygen equipment + fan + chimney" as the waste gas treatment scheme:
Process introduction:
In the first step, the collected waste gas enters into the ionization trapper. When the waste gas passes through, the dust and tar substances in the waste gas are ionized under the action of electric charge, moving towards the charged metal wire and tube wall, and losing electric charge. When the impurity mass adsorbed on the precipitation pole is added to the greater than its adhesion, under the action of gravity, it will flow down automatically from the ionization trapper The bottom of the device is discharged, and the net gas leaves from the upper part of the ionization trapper and enters the next process, so that the pollutants can be degraded and removed.
In the second step, the captured exhaust gas enters into the compound photo oxygen device. In this device, the ozone and · Oh (hydroxyl radical) produced by the reaction of high-energy photon beam and air react to decompose and oxidize the odorous gas. At the same time, the chain structure of macromolecular odorous gas is broken under the action of high-energy photon, which makes most of the organic gas substances transform into odorless micromolecule Or completely mineralized, producing water and CO2. The waste gas enters the zeolite molecular sieve layer for deep purification, and finally it is discharged through the fan pipe chimney to meet the standard.